Swapping out the adapter seal on the Can PH1 adapter

WHY YOU WOULD DO THIS:  We have had some feedback where the seal in the Can PH1 adapter is leaking.  We have created a replacement seal that solves the problem.  Most locations have already completed this.

WHAT YOU DO: All Canon adapters need to have the seal changed out.  This means taking out the old one and putting in a new one.  You will be receiving a new seal.  It is not difficult to do this and anyone can do it.  First, take notice which side is up on the seal. Simply use a screwdriver or similar tool to pry out the old seal from the prep flap.  Tuck the new seal into the bottom of the prep flap as pictured below.  Make sure it is lying flat all around the perimeter when finished.  This fix will improve the quality of the refilling process, and should eliminate leakage during prep.  Don’t worry about damaging the seal, it’s pretty tough.

Putting in new seal